Item 1418

MAKE: SynchroLite ~ Rotor - Hub - 3-blade - CVJ & HS - End Cap

Drawing:

 

 

Bill of Material 1418

Notes:

It is held in position by two or more clips (brackets) or pins.

The O-ring is only shown for reference.

This cap and its clips hold the deep groove ball bearing in position and seal the inboard end of the pitch-bearing cavity. .

Material:

Probably machined from aluminum plate.

Weight Calculation (approximate):

 

Quantity:

Dimensions:

Weight: (lbs)

 

 

1

 

 

 

 

Back to top | SynchroLite Home Page | UniCopter Home Page | Nemesis Home Page

Last Revised: January 19, 2005