Item 1446

• Perhaps the root and the tip holder should be one piece.
• It will serve as the male part of the mold during cure.
• There will be no need to have tension along the X-axis. In addition, the clamping of the tip, by the female molds will 'stretch' the tow slightly.
• There will probably be no need for two A-axis motors or x-shaft, at least not for the spar.

• The spar tip holder and the spar root holder should probably be combined into one long tool.
• The inner core will be located against this tool before the winding starts.
• To tension the threads, the bar at the tip end could be advance slightly along the span of the tool.