B324

MAKE: UniCopter ~ Rotor - Blade - NACA 00xx

Notes re Twist on a Non-ABT Blade:

Consider making the core without twist then twisting it 4 to 8 degrees CW and CCW when adding the skin and making the final blade.

Consider making the fiberglass female mold without twist then twisting it 6 to 10 degrees CW and CCW when adding the skin and making the final blade.

Back to top | UniCopter Home Page | SynchroLite Home Page | Nemesis Home Page

Last Revised: August 9, 2004