Electrotor-SloMo ~ Motor - Radial Flux - Stator

Notes to be eventually moved to appropriate Item page.

Lamination Core: "An alternative method is to insert long axial studs that pass through the holes in the core laminations to serve as strength members and to hold the stack in compression. These studs are insulated with tube material and have bolts on either end that are torqued up to apply pressure to the core." For the Electrotor these studs will also serve as the attachment to the frame.

Aluminum Interactions with Magnets

Heat Sink Compound: The use of this compound between the laminations and the (mast) Ring 1984 may enhance the transfer of the heat from the Laminations. But, will it affect the flux action and could it provide more room for the stator to shingle?

Database ~ Motor: Form - Stator Winding Workup:

On web page; Motor - Radial Flux - Stator - Outrunner Project; Item 1910

Working Papers:

DESIGN:

B600

MAKE:

B596

BUY:

Items:

DESIGN:

	Name	Item
	Motor - Radial Flux - Stator - Assembly	1952
	Motor - Radial Flux - Stator - Wiring	1910
	Motor - Radial Flux - Stator - Cooling	1956
	Motor - Radial Flux - Stator - Lamination	1926
	Motor - Radial Flux - Stator - Soft Magnetic Composite (SMC)

MAKE:

Name	Drawing	BOM
Motor - Radial Flux - Stator - Assembly	1980.dwg	1980
Motor - Radial Flux - Stator - Lamination	2001.dwg	2001
Motor - Radial Flux - Stator - Upper Ring	1981.dwg	1981
Motor - Radial Flux - Stator - Base	2008.dwg	2008
Motor - Radial Flux - Stator - Wiring	1983.dwg	1983
Motor - Radial Flux - Stator - Mounting Ring	2079
Motor - Radial Flux - Stator - Mounting Plate	2108

Same Page except Axial Flux: ~ Electrotor-SloMo ~ Motor - Axial Flux - Stator

Same Page; Different Craft: ~ AeroVantage

General Information: ~ OTHER: Electrical - Motor - Stator

Last Revised: October 28, 2011