SynchroLite ~ Power Train (for 1 engine)

Overview:

Pictures of Mockup:

Not yet

 

Working Papers:

 

DESIGN:

A078

MAKE:

A079

 

For general information on mechanics see: Mechanics

Ratios, HP, Torque & Losses:

Secondary Grouping:

 

Assembly:

The proposed configurations and the final assembly of the complete power train for 1 engine.

 

Frame:

The supporting frame of the power train.

 

 

 

 

Reduction - Primary:

Belt drive ~or~ Gear set

 

Soft-Start:

 

 

Overrunning Clutch:

Located inside large sheave.

 

 

 

 

Reduction - Secondary:

Secondary reduction and rotor synchronization are in the same box.

 

Housing:

This is currently relevant to the 2 and 3 gear set gearboxes.

 

Bearing:

Bearings used in power train, inc. gearbox (not control or rotor bearings).

 

Lubrication:

To provide lubrication to the power train. Probably splash type inside secondary reduction

 

 

 

 

Mast:

Not an integral part of the secondary reduction.

Same Page ~ Different Craft: ~ Dragonfly ~ UniCopter ~ SynchroLite (w/ 2 engines)

Alternate Principal Assemblies: ~ Dragonfly Home Page ~ Electrotor Home Page

Introduction Page | SynchroLite Home Page | Electrotor Home Page | UniCopter Home Page | Nemesis Home Page | AeroVantage Home Page:

Last Revised: May 8, 2011